Vertical Service Activation Codes - Cisco 8851 Administration Manual

Parameter
Interdigit Long Timer
Interdigit Short Timer

Vertical Service Activation Codes

Parameter
Call Return Code
Blind Transfer
Code
Cfwd All Act Code
Cfwd All Deact
Code
Cfwd Busy Act
Code
Cfwd Busy Deact
Code
Cfwd No Ans Act
Code
Cfwd No Ans
Deact Code
CW Act Code
Description
Long timeout between entering digits when dialing. The interdigit timer
values are used as defaults when dialing. The Interdigit_Long_Timer
is used after any one digit, if all valid matching sequences in the dial
plan are incomplete as dialed. Range: 0–64 seconds.
Default: 10
Short timeout between entering digits when dialing. The
Interdigit_Short_Timer is used after any one digit, if at least one
matching sequence is complete as dialed, but more dialed digits would
match other as yet incomplete sequences. Range: 0–64 seconds.
Default: 3
Description
This code calls the last caller.
Defaults to *69.
Begins a blind transfer of the current call to the extension specified after the activation
code.
Defaults to *88.
Forwards all calls to the extension specified after the activation code.
Defaults to *72.
Cancels call forwarding of all calls.
Defaults to *73.
Forwards busy calls to the extension specified after the activation code.
Defaults to *90.
Cancels call forwarding of busy calls.
Defaults to *91.
Forwards no-answer calls to the extension specified after the activation code.
Defaults to *92.
Cancels call forwarding of no-answer calls.
Defaults to *93.
Enables call waiting on all calls.
Defaults to *56.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Cisco IP Phone Web Page
237