Configure Busy Lamp Field With Other Features - Cisco 8851 Administration Manual

Configure Busy Lamp Field with Other Features

Procedure
Step 1 On the Configuration Utility page, select Admin Login > Advanced > Voice > Attendent Console.
Step 2 Select a key expansion module line key.
Step 3 Enter a string in this format:
fnc=blf;sub=xxxx@$PROXY;usr=8888@$PROXY.
Where:
• fnc= blf means function=busy lamp field
• sub= the URI to which the SUBSCRIBE message is sent. This name must be identical to the name
• usr= the BroadSoft user being monitored by BLF with 8888 as the phone being monitored. Replace
Step 4 Click Submit All Changes.
Configure Busy Lamp Field with Other Features
You can configure busy lamp field to work with other features on your key expansion module, such as speed
dial, and call pickup. Use the information in the following table as a guide when selecting the correct string
format.
Procedure
Step 1 On the Configuration Utility page, select Admin Login > Advanced > Voice > Attendent Console.
Step 2 Select a key expansion module line key.
Step 3 Enter a string in the appropriate format.
Feature
Busy Lamp Field and Speed
Dial
Busy Lamp Field, Speed Dial,
and Call Pickup
Busy Lamp Field, Speed Dial,
and Park Notification
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
168
defined in the List URI: sip: parameter. xxxx is the name that is defined in List URI: sip: parameter.
Replace xxxx with the exact defined name. $PROXY is the server. Replace $PROXY with the server
address or name.
8888 with the exact number of the monitored phone. $PROXY is the server. Replace $PROXY with the
server address or name.
String Format
fnc=blf+sd;sub=xxx@proxy;ext=monitored userID@proxy
fnc=blf+sd+cp;sub=xxx@proxy;ext=monitored userID@proxy
fnc=blf+sd;sub=xxx@proxy;ext=monitored userID@proxy
This combination cannot be configured using the extended function. This combination is supported
on Broadsoft servers only and it is configured using the BLF List and related configuration on the
server.
.
.
.