Field
Password
802.11 mode
Verify Phone Startup
After the Cisco IP Phone has power connected to it, the phone automatically cycles through a startup diagnostic
process.
Procedure
Step 1
If you are using Power over Ethernet, plug the LAN cable into the Network port.
Step 2
If you are using the power cube, connect the cube to the phone and plug the cube into an electrical outlet.
The buttons flash amber and then green in sequence during the various stages of bootup as the phone checks
the hardware.
If the phone completes these stages successfully, it has started up properly.
Video Transmit Resolution Setup
Cisco IP Phone 8845 and 8865 supports the following video formats:
• 720p (1280x720)
• WVGA (800x480)
• 360p (640x360)
• 240p (432x240)
• VGA (640x480)
• CIF (352x288)
• SIF (352x240)
• QCIF (176x144)
Cisco IP Phones that support video negotiate the best bandwidth and resolution based on the phone configuration
and phone screen limitations.
Field Type or
Default
Choices
Auto
• Auto
• 2.4 GHz
• 5 GHz
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Description
Allows you to enter a password for the network
profile.
Allows you to select the wireless signal standard that
is used in the WLAN.
Verify Phone Startup
43