Enable Remote Call Recording With Sip Info - Cisco 8851 Administration Manual

Icon
Procedure
Step 1 On the phone web page, select Admin Login > Advanced > Voice > Phone.
Step 2 In the Supplementary Services section, click Yes or click No to enable or to disable call recording in the
Call Recording Serv field.
Step 3 (Optional) In the Programmable Softkeys section, to enable softkeys, add a string in this format in the
Connected Key List and Conferencing Key List fields.
crdstart;crdstop;crdpause;crdresume
Step 4 In the phone web page, click the Ext(n) tab that requires call recording.
Step 5 In the SIP Settings section, in the Call Recording Protocol, select SIPREC as the call recording protocol.
For details on the SIP Settings fields, see
Step 6 Click Submit All Changes.

Enable Remote Call Recording with SIP INFO

You can enable call recording on a phone so that your user can record an active call. The recording mode
configured on the server controls the display of the recording softkeys for each phone.
Table 18: Recording Mode and Recording Softkeys
Recording Mode in Server
Always
On Demand
Meaning
Recording in progress (8811)
Recording paused
Recording paused (8811)
SIP Settings, on page
Recording Softkeys Available on the Phone
No softkeys available.
Your user can't control recording from the phone.
Recording starts automatically when a call is
connected.
Record
When a call is connected, recording starts
automatically but the recording is not saved until the
user presses the Record softkey. Your user sees a
message when recording state changes.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Call Features Configuration
256.
135