Configure The Busy Lamp Field For Multiple Users With The Configuration Utility - Cisco 8851 Administration Manual

Busy Lamp Field Configuration on a Monitoring Phone
To configure the busy lamp field on a phone that you want to monitor:
• Configure a busy lamp field for a specific line key or user
• Configure a busy lamp field for multiple users (BroadSoft only)
The BLF List URI overrides the extended function setting when Use Line Keys For BLF List is enabled. This
means that the busy lamp field, speed dial, and call pickup features are configured for each user as the BLF
List URI specifies.

Configure the Busy Lamp Field for Multiple Users with the Configuration Utility

If a phone registers to a BroadSoft server, you can configure the busy lamp field for several users at once.
Before You Begin
The BLF List URI must be configured on the server.
Procedure
Step 1 On the Configuration Utility page, select Admin Login > advanced > Voice > Att Console.
Step 2 Set Use Line Keys For BLF List to Yes.
Step 3 Enter a string in the BLF List URI field in this format:
parameter@domain name.
Step 4 (Optional) To configure the busy lamp field with call pickup, go the the Regional tab and enter *97 in the
Call Pickup Code field.
Step 5 Click Submit All Changes.
Configure the Busy Lamp Field in the Phone Configuration File
If the phone is registered to a BroadSoft server, you can use the phone configuration file to configure the busy
lamp field.
Procedure
Step 1
Edit the BLF_List_URI parameter of the phone configuration file that is available in the BroadSoft server.
Step 2 Add the List URI: sip: parameter @ domain name.
The List URI must match the one defined in the BroadSoft server.
Step 3
Save the changes.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
166