New And Changed Features For Firmware Release 11(0) - Cisco 8851 Administration Manual

New and Changed Information
Revision
Added how to confgure missed call
indication on the Configuration Utility
Page
Added factory reset and pinging in phone
web page with a specific URL
Added information on a star code is added
to Conference hard key from the phone
web page
Logo can be added as boot display
Key expansion modue will be
auto-detected when plugged in

New and Changed Features for Firmware Release 11(0)

All new features have been added to
Revision
Added Configure PRT Upload URL
Added Problem Report tool enhancements
Added Problem Report tool uplaod
Added enabling dial assistance
Added extra line keys support
Updated basic calls enhancements
New and Changed Features for Firmware Release 11(0)
Updated Section
• Supplementary Services
• Configure Missed Call Indication with the Configuration
Utility, on page 136
Factory Reset the Phone from Phone Web Page, on page 290
Identify Phone Issues with a URL in the Phone Web Page, on
page 291
Enable Conference Button with a Star Code, on page 164
Add Logo as Boot Display , on page 131
Auto Detection of Key Expansion Modules, on page 99
Telephony Features for Cisco IP Phone, on page
Updated Section
Configure PRT Upload, on page 183
• Report All Phone Issues from the Phone Web
Page, on page 186
Configure PRT Upload, on page 183
Enable Dial Assistance, on page 165
Set up Extra Line Keys, on page 165
• NAT Settings, on page 255
• SIP Settings, on page 256
• Call Feature Settings, on page 258
• Proxy and Registration, on page 260
• Subscriber Information, on page 263
• Audio Configuration, on page 264
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
155.
3