Xml Directory Service - Cisco 8851 Administration Manual

XML Services
• CiscoIPPhoneStatusFile
• CiscoIPPhoneResponse
• CiscoIPPhoneError
• CiscoIPPhoneGraphicFileMenu
• Init:CallHistory
• Key:Headset
• EditDial:n
The full list of supported URIs is contained in Cisco Unified IP Phone Services Application Development
Notes for Cisco Unified Communications Manager and Mutiplatform Phones, located here:
https://www.cisco.com/c/en/us/support/collaboration-endpoints/unified-ip-phone-7800-series/
products-programming-reference-guides-list.html.

XML Directory Service

When an XML URL requires authentication, use the parameters XML UserName and XML Password.
The parameter XML UserName in XML URL is replaced by $XML UserName.
For example:
The parameter XML UserName is cisco. The XML Directory Service URL is
http://www.sipurash.compath?username=$XML_User_Name.
This results in the request URL: http://www.sipurash.com/path?username=cisco.
XML Applications
When authentication is required for CGI/Execute URL via Post from an external application (for example, a
web application) to the phones, the parameter CISCO XML EXE Auth Mode is used in 3 different scenarios:
• Trusted—No authentication is performed (local user password is set or not). This is the default.
• Local Credential—Authentication is based on digest authentication using the local user password, if the
local user password is set. If not set, then no authentication is performed.
• Remote Credential—Authentication is based on digest authentication using the remote username/password
as set in the XML application on the web page (to access an XML application server).
Macro Variables
You can use macro variables in XML URLs. The following macro variables are supported:
• User ID—UID1, UID2 to UIDn
• Display name—DISPLAYNAME1, DISPLAYNAME2 to DISPLAYNAMEn
• Auth ID—AUTHID1, AUTHID2 to AUTHIDn
• Proxy—PROXY1, PROXY2 to PROXYn
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
148