Ca Settings - Cisco 8851 Administration Manual

Parameter
Upgrade Rule
Log Upgrade Request Msg
Log Upgrade Success Msg
Log Upgrade Failure Msg
For more information about the Provisioning page, see the Cisco IP Phone 8800 Series Multiplatform Phones
Provisioning Guide.

CA Settings

Parameter
Custom CA Rule
HTTP Settings
Parameter
HTTP User Agent Name
Description
A firmware upgrade script that defines upgrade conditions and associated
firmware URLs. It uses the same syntax as Profile Rule.
Use the following format to enter the upgrade rule:
protocol://server[:port]/profile_pathname
For example:
tftp://192.168.1.5/image/sip88xx.10-3-1-9-3PCC.loads
If no protocol is specified, TFTP is assumed. If no server-name is
specified, the host that requests the URL is used as the server name. If
no port is specified, the default port is used (69 for TFTP, 80 for HTTP,
or 443 for HTTPS).
Default: Blank
Syslog message issued at the start of a firmware upgrade attempt.
Default: $PN $MAC -- Requesting upgrade
$SCHEME://$SERVIP:$PORT$PATH
Syslog message issued after a firmware upgrade attempt completes
successfully.
Default: $PN $MAC -- Successful upgrade
$SCHEME://$SERVIP:$PORT$PATH -- $ERR
Syslog message issued after a failed firmware upgrade attempt.
Default: $PN $MAC -- Upgrade failed: $ERR
Description
The URL to download Custom CA.
Default: Blank
Description
Allows you to enter a name for HTTP user.
Default: Blank
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Cisco IP Phone Web Page
233