Wireless Headsets - Cisco 8851 Administration Manual

Headsets
Displaying the analog headset as the default allows users to enable wideband for the analog headset.
USB Headsets
Wired and wireless USB headsets are supported. You can connect a USB headset (or the base station for a
wireless headset) to either the back USB port (if your phone has this port) or to the side USB port.
Enable a USB Headset
You must enable the applicable USB port (either the back USB or the side USB port) in Cisco Unified
Communications Manager Administration. Also, for the Enable/Disable USB Classes parameter in Cisco
Unified Communications Manager Administration, ensure that Audio Class is selected.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 Select the desired phone.
Step 3 Navigate to the Phone Configuration window, and select Override Common Settings.
Step 4 Click Save.
Step 5 Click Apply Config.
Step 6
Restart your phone.
Disable a USB Headset
To disable your USB headset, you disable the USB port on your phone. Another way is to select a different
headset in the Accessories window on the phone.
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 Select the desired phone.
Step 3 In the Phone Configuration window, uncheck Override Common Settings.
Step 4 Click Save.
Step 5
Click Apply Config.
Step 6 Restart your phone.

Wireless Headsets

Your Cisco IP Phone 7800 Series phones support wireless headsets. For a list of supported wireless headsets,
see http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
86