Access Port Information - Cisco 8851 Administration Manual

Parameter
LLDPNeighborPort
PortSpeed

Access Port Information

Parameter
RxtotalPkt
Rxunicast
Rxbroadcast
Rxmulticast
RxDropPkts
RxUndersizePkts
RxOversizePkts
RxJabbers
RxAlignErr
Rxsize64
Rxsize65to127
Rxsize128to255
Rxsize256to511
Rxsize512to1023
Description
Neighbor device port to which the phone connects that LLDP discovered.
Speed and duplex information.
Description
Total number of packets that the phone received.
Total number of unicast packets that the phone received.
Total number of broadcast packets that the phone received.
Total number of multicast packets that the phone received.
Total number of packets dropped.
The total number of packets received that are less than 64 octets long,
which excludes framing bits, but includes FCS octets, and are otherwise
well formed.
The total number of packets received that are longer than 1518 octets,
which excludes framing bits, but includes FCS octets, and are otherwise
well formed.
The total number of packets received that are longer than 1518 octets,
which excludes framing bits, but incudes FCS octets, and do not end
with an even number of octets (alignment error), or had an FCS error.
Total number of packets between 64 and 1522 bytes in length that were
received and that had a bad Frame Check Sequence (FCS).
Total number of received packets, including bad packets, that were
between 0 and 64 bytes in size.
Total number of received packets, including bad packets, that were
between 65 and 127 bytes in size.
Total number of received packets, including bad packets, that were
between 128 and 255 bytes in size.
Total number of received packets, including bad packets, that were
between 256 and 511 bytes in size.
Total number of received packets, including bad packets, that were
between 512 and 1023 bytes in size.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Cisco IP Phone Web Page
213