Configure The Key Expansion Module From The Phone Web Page; Access Key Expansion Module Setup; Reset The Single Lcd Screen Key Expansion Module; Cisco Ip Phone 8800 Series Multiplatform Phones Administration Guide - Cisco 8851 Administration Manual

Configure the Key Expansion Module from the Phone Web Page

Configure the Key Expansion Module from the Phone Web Page
You can set up your Key Expansion Module from the phone web page.
Procedure
Step 1 On the phone web page page, click Admin Login > Advanced > Voice > Attendant Console.
Step 2 From the Number of Units list, select the number of supported key expansion modules.
Step 3
Click Submit All Changes.

Access Key Expansion Module Setup

After you install one or more key expansion modules on the phone and configure them in the Configuration
Utility page, the phone automatically recognizes the key expansion modules.
When multiple key expansion modules are attached, they are numbered according to the order in which they
connect to the phone:
• Key expansion module 1 is the expansion module closest to the phone.
• Key expansion module 2 is the expansion module in the middle.
• Key expansion module 3 is the expansion module farthest to the right.
When the phone automatically recognizes the key expansion modules, you can then choose the Show Details
softkey for additional information about the selected key expansion module.
Procedure
Step 1
On the phone, press Applications
Step 2 Press Status > Accessories.
All properly installed and configured key expansion modules display in the list of accessories.

Reset the Single LCD Screen Key Expansion Module

If you are having technical difficulties with your Cisco IP Phone 8800 Key Expansion Module, you can reset
the module to the factory default settings.

Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide

100
.