Cisco Ip Phone 8800 Series Multiplatform Phones Administration Guide - Cisco 8851 Administration Manual

8800 series
Hide thumbs Also See for 8851:
Table of Contents

Advertisement

Regional Parameters and Supplementary Services
The time of the log messages and status messages are in UTC time. The time zone setting does not affect
Note
them.
Procedure
Step 1
In the phone web user interface, navigate to Admin Login > advanced > Voice > Regional.
Step 2
Set the Daylight Saving Time Enable drop-down list box to Yes.
Step 3
In the Daylight Saving Time Rule field, enter the DST rule. This value affects the time stamp on the CallerID.
Step 4
Click Submit All Changes.
Daylight Saving Time Examples
The following example configures daylight saving time for the U.S, adding one hour starting at midnight on
the first Sunday in April and ending at midnight on the last Sunday of October; add 1 hour (USA, North
America):
start=4/1/7/0:0:0;end=10/31/7/0:0:0;save=1
start=4/1/7;end=10/-1/7;save=1
start=4/1/7/0;end=10/-1/7/0;save=1
The following example configures daylight saving time for Egypt, starting at midnight on the last Sunday in
April and ending at midnight on the last Sunday of September:
start=4/-1/7;end=9/-1/7;save=1 (Egypt)
The following example configures daylight saving time for New Zealand (in version 7.5.1 and higher), starting
at midnight on the first Sunday of October and ending at midnight on the third Sunday of March.
start=10/1/7;end=3/22/7;save=1 (New Zealand)
The following example reflects the new change starting in March. DST starts on the second Sunday in March
and ends on the first Sunday in November:
start=3/8/7/02:0:0;end=11/1/7/02:0:0;save=1
The following example configures the daylight saving time starting on the last Monday (before April 8) and
ending on the first Wednesday (after May 8.)
start=4/-8/1;end=5/8/3;save=1
Select a Display Language on the Phone
Use the Language Selection parameter to select the phone default display language. The value must match
one of the languages that the dictionary server supports. The script (dx value) is as follows:
• <Language_Selection ua ="na">
• </Language_Selection>

Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide

72

Advertisement

Table of Contents
loading

This manual is also suitable for:

8861

Table of Contents