Phone Setup; Connect Footstand; Adjust The Handset Rest - Cisco 8811 User Manual

Phone Setup

•
•
•

Connect Footstand

The phone includes an adjustable footstand. If the phone is placed on a table or desk, the footstand can be
connected to the back of the phone. The footstand enables the phone angle to be adjusted from a minimum
of 35 degrees to a maximum of 50 degrees to ensure an optimal viewing angle.
Adjusting the footstand to the required angle may require more force than you expect.
Note
Procedure
Step 1 Insert the connectors into the slots provided.
Step 2
Press the footstand until the connectors snap into place.
Step 3 Adjust the angle by pressing down or pulling up on the footstand. The connectors are made of a flexible
material.

Adjust the Handset Rest

If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the receiver does not
slip out of the cradle.
Connect Footstand, page 23
Adjust the Handset Rest, page 23
Secure the Phone with a Cable Lock, page 24
Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager 10.5
2
C H A P T E R
23