Chapter 2 Phone Setup; Connect Footstand; Adjust The Handset Rest - Cisco 7811 User Manual

Phone Setup
•
•

Connect Footstand

If your phone is placed on a table or desk, connect the footstand to the back of the phone.
Procedure
Step 1 Insert the curved connectors into the lower slots.
Step 2 Lift the footstand until the connectors snap into the upper slots.
Note
Step 3 Adjust the angle of the phone.
Note

Adjust the Handset Rest

If your phone is wall-mounted, you may need to adjust the handset rest to ensure that the receiver does not
slip out of the cradle.
Connect Footstand, page 21
Adjust the Handset Rest, page 21
Connecting and disconnecting the footstand may require a little more force than you expect.
You cannot adjust the Cisco IP Phone 7811
footstand.
Cisco IP Phone 7811, 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP)
2
C H A P T E R
21