Clean The Silicone Cover; Connect The Footstand - Cisco 7800 Series Accessories Manual

Hide thumbs Also See for 7800 Series:

Table of Contents

Clean the Silicone Cover

Procedure

Step 1

Remove the handset from the phone cradle.

Step 2

Disconnect the cable from the handset.

Step 3

Slide the silicone cover over the handset until the ear cup is completely inside the cover.

Step 4

Pull the cover over the other end of the handset.

Step 5

Make sure the cover is flush against the handset and that the cable port is unobstructed.

Step 6

Reconnect the handset to the phone and return it to the cradle.

Clean the Silicone Cover

Clean your cover if you are worried about dirt and grime. A regular cleaning also prevents the spread of

bacteria or germs.

Procedure

Step 1

Remove the silicone cover.

Step 2

Clean the cover.

Note

Step 3

Dry the cover thoroughly. Don't put it back on the phone until it is completely dry.

Step 4

Put the cover back on the phone.

If your phone is placed on a table or desk, connect the footstand to the back of the phone.

Cisco IP Phone 7800 and 8800 Series Accessories Guide for Cisco Unified Communications Manager

Use a low-strength cleaning agent to prolong the life and look of the case.

Other Accessories

Table of Contents

8800 series