Cisco Codec C20 Reference Manual page 93

Cisco TelePresence System Codec C20
Contents Introduction
The Preset commands
xCommand Preset Store
Store the connector selections for all video input sources and the current position for all cameras.
Note that information about all video input sources and all camera positions are included in the same
preset. The system may hold 15 predefined video input presets. These presets are available for far end
control, i.e. they are referred in the PresetId parameter of the xCommand FarEndControl Preset Activate
command. In contrast, the xCommand Camera Preset commands applies to individual cameras only.
Those presets are not available for far end control.
PresetId: The ID of this preset.
Type: Currently it makes no difference if you select Camera or All. However, this may change in the
future (other audio or video settings may be included in a preset). If you want to ensure that a preset
only affects camera positions we recommend that you select Camera.
Description: Enter a description of the camera preset.
Requires user role: ADMIN
Parameters:
PresetId(r): <1..15>
Type(r): <All/Camera>
Description: <S: 0, 255>
example:
xCommand Preset Store PresetId:3 Type:Camera Description:"Left view"
OK
*r PresetStoreResult (status=OK):
** end
xCommand Preset Activate
Activate one of the stored local presets.
PresetId: The ID of the preset you want to activate.
Requires user role: USER
Parameters:
PresetId(r): <1..15>
example:
xCommand Preset Activate PresetId:3
OK
*r PresetActivateResult (status=OK):
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
xCommand Preset Clear
93
xCommand xCommand
Delete a preset.
PresetId: The ID of the preset you want to delete.
Requires user role: USER
Parameters:
PresetId(r): <1..15>
example:
xCommand Preset Clear PresetId:3
OK
*r PresetClearResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.