Cisco Codec C20 Reference Manual page 76

Cisco TelePresence System Codec C20
Contents Introduction
xCommand CallLog Received Delete
Delete the call log of received calls. If a logtag is given as argument, that specific call is deleted from
the log. If no logtag is given the system deletes the complete received calls log. The LogTag values for
received calls are found by issuing the xHistory CallLog Received command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
example:
xCommand CallLog Received Delete LogTag:126
*r DeleteResult (status=OK):
** end
xCommand CallLog Missed Delete
Delete the call log of missed calls. If a logtag is given as argument, that specific call is deleted from the
log. If no logtag is given the system deletes the complete missed calls log. The LogTag values for missed
calls are found by issuing the xHistory CallLog Missed command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
example:
xCommand CallLog Missed Delete LogTag:119
*r DeleteResult (status=OK):
** end
xCommand CallLog Missed Dismiss
Review the call log of dismissed calls. If a logtag is given as argument, that specific call is deleted from
the log. If no logtag is given the system deletes the complete missed calls log. The LogTag values for
missed calls are found by issuing the xHistory CallLog Missed command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
example:
xCommand CallLog Missed Dimissed LogTag:119
*r DismissResult (status=OK):
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
The CamCtrlPip commands
xCommand CamCtrlPip
76
xCommand xCommand
Show or hide the camera selfview in a small window (picture in picture).
Mode: Select whether the self-view picture in picture is on or off.
Duration: Set how long the self-view is shown for on screen.
Requires user role: USER
Parameters:
Mode(r): <On/Off<
Duration: <0..60<
example:
xCommand CamCtrlPip Mode: On
*r CamCtrlPipResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.