Cisco Codec C20 Reference Manual page 90

Cisco TelePresence System Codec C20
Contents Introduction
xCommand Phonebook ContactMethod Add
Add details about the call setup to an existing contact in the local phonebook. Returns the ContactMethodId
(Name: 1), which is a unique Id of the contact method.
ContactId: A unique identifier for the contact, which was created when the xCommand Phonebook
Contact Add command was issued.
Device: Set which type of device to call to.
Number(r): The phone number or address of the contact.
Protocol: Select Auto, SIP, H323 or H320 protocol.
CallRate: Set a call rate.
CallType: Select a call type (audio or video).
Requires user role: ADMIN
Parameters:
ContactId(r): <S: 0, 255>
Device: <Mobile/Other/Telephone/Video>
Number(r): <S: 0, 255>
Protocol: <Auto/H320/H323/SIP>
CallRate: <0..6000>
CallType: <Audio/Video>
example:
xCommand Phonebook ContactMethod Add ContactId:localContactId-2 Number:54321
Protocol:H323
OK
*r PhonebookContactMethodAddResult (status=OK):
Name: 1
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
xCommand Phonebook ContactMethod Modify
90
xCommand xCommand
Modify details about the call setup for an existing contact in the local phonebook.
ContactId: A unique identifier for the contact. It was created when the xCommand Phonebook Contact
Add command was issued.
ContactMethodId: A unique identifier for the contact method. It was created when the xCommand
Phonebook ContactMethod Add command was issued.
Device: Set which type of device to call to.
Number: The phone number or address of the contact.
Protocol: Select Auto, SIP, H323 or H320 protocol.
CallRate: Set a call rate.
CallType: Select a call type (audio or video).
Requires user role: ADMIN
Parameters:
ContactId(r): <S: 0, 255>
ContactMethodId(r): <S: 0, 255>
Device: <Mobile/Other/Telephone/Video>
Number: <S: 0, 255>
Protocol: <Auto, H320/H323/SIP>
CallRate: <0..6000>
CallType: <Audio/Video>
example:
xCommand Phonebook ContactMethod Modify ContactMethodId:117
ContactId:localContactId-10 Number:"newnumber@cisco.com"
OK
API Reference Guide
xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.