Cisco Codec C20 Reference Manual page 161

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Video Selfview Mode
Shows whether selfview mode is set on or not.
Value space of the result returned:
<On/Off>
example:
xStatus Video Selfview Mode
*s Video Selfview Mode: Off
** end
xStatus Video Selfview FullscreenMode
Shows whether selfview is set on full screen mode or not.
Value space of the result returned:
<On/Off>
example:
xStatus Video Selfview FullscreenMode
*s Video Selfview FullscreenMode: Off
** end
xStatus Video Selfview PIPPosition
Shows the position of the selfview image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
example:
xStatus Video Selfview PIPPosition
*s Video Selfview PIPPosition: LowerRight
** end
xStatus Video Selfview OnMonitorRole
Identifies which monitor(s) contains the selfview, if present.
Value space of the result returned:
<First/Second/Third/Fourth>
example:
xStatus Video Selfview OnMonitorRole
*s Video Selfview OnMonitorRole: First
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
161
xCommand
xStatus Video PIP ActiveSpeaker Position
Shows the position of the active speaker's image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
example:
xStatus Video PIP ActiveSpeaker Position
*s Video PIP ActiveSpeaker Position: UpperCenter
** end
xStatus Video PIP Presentation Position
Shows the position of the presentation image on the screen.
Value space of the result returned:
<UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight>
example:
xStatus Video PIP Presentation Position
*s Video PIP Presentation Position: CenterLeft
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.