Cisco Codec C20 Reference Manual page 84

Cisco TelePresence System Codec C20
Contents Introduction
xCommand FarendControl Source Select
Select which video input source to use as the main source on the far end system.
CallId: The CallID is returned when the xCommand Dial command is run. During the call you can run the
xStatus Call command to see the CallId.
SourceId: Select a video input source on the far end.
Requires user role: USER
Parameters:
CallId: <0..65534>
SourceId(r): <0..15>
example:
xCommand FarEndControl Source Select CallId:3 SourceId:1
*r FECCSelectSourceResult (status=OK):
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
The HttpFeedback commands
xCommand HttpFeedback Register
xCommand HttpFeedback Deregister
84
xCommand xCommand
Register the system to a HTTP(S) server to return XML feedback over HTTP(S) to specific URLs.
FeedbackSlot: You can have from 1 to 4 slots for feedback.
ServerUrl: Define the URL for the HTTP(S) server.
Expression[1..15]: What parts of the Status and Configuration XML documents to monitor are specified
by XPath expressions. You can have from 1 to 15 XPath expressions.
Requires user role: USER
Parameters:
FeedbackSlot: <1..4>
ServerUrl(r): <S: 1, 2048>
Expression[1..15]: <S: 1, 255>
example:
xCommand HttpFeedback Register FeedbackSlot:1 ServerUrl:10.47.19.41
Expression[1]:Status/Video Expression[2]:Status/Audio Expression[3]:Status/Call
Expression[4]:Status/Conference
OK
*r FeedbackRegisterResult (status=OK):
FeedbackSlot: 1
** end
Deregister XML feedback over HTTP(S).
Requires user role: USER
Parameters:
FeedbackSlot(r): <1..4>
example:
xCommand HttpFeedback Deregister FeedbackSlot:1
OK
*r FeedbackDeregisterResult (status=OK):
FeedbackSlot: 1
** end
API Reference Guide
xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.