Cisco Codec C20 Reference Manual page 49

Cisco TelePresence System Codec C20
Contents Introduction
xConfiguration Provisioning externalManager Protocol
Determine whether to use secure management or not.
Requires user role: ADMIN
Value space: <HTTP/HTTPS>
HTTP: Set to HTTP to disable secure management. Requires HTTP to be enabled in the NetworkServices
HTTP Mode setting.
HTTPS: Set to HTTPS to enable secure management. Requires HTTPS to be enabled in the
NetworkServices HTTPS Mode setting.
example: xConfiguration Provisioning ExternalManager Protocol: HTTP
xConfiguration Provisioning externalManager Path
Set the Path to the external manager / provisioning system. This setting is required when several manage-
ment services reside on the same server, i.e. share the same External Manager address.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
example: xConfiguration Provisioning ExternalManager Path: "tms/public/external/
management/SystemManagementService.asmx"
xConfiguration Provisioning externalManager Domain
Enter the SIP domain for the VCS provisioning server.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
example: xConfiguration Provisioning ExternalManager Domain: "any.domain.com"
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration xConfiguration
RTP configuration
xConfiguration RTP Ports Range Start
xConfiguration RTP Ports Range Stop
49
xCommand
Specify the first port in the range of RTP ports. Also see the H323 Profile [1..1] PortAllocation setting.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1024..65502>
Range: Select a value from 1024 to 65502.
example: xConfiguration RTP Ports Range Start: 2326
Specify the last RTP port in the range. Also see the H323 Profile [1..1] PortAllocation setting.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1056..65535>
Range: Select a value from 1056 to 65535.
example: xConfiguration RTP Ports Range Stop: 2486
API Reference Guide
xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.