Cisco Codec C20 Reference Manual page 108

Cisco TelePresence System Codec C20
Contents Introduction
The Audio status
xStatus Audio
Shows the top level overview of the audio status. The identities of the LocalInput, RemoteInput,
LocalOutput and RemoteOutput are used when querying additional information.
example:
xStatus Audio
xStatus Audio
*s Audio Microphones Mute: Off
*s Audio Volume: 35
** end
xStatus Audio Microphones Mute
Shows the microphones mute mode.
Value space of the result returned:
<On/Off>
example:
xStatus Audio Microphones Mute
*s Audio Microphones Mute: Off
** end
xStatus Audio Volume
Shows the volume level (dB) of the loudspeaker output.
Value space of the result returned:
<0..100>
example:
xStatus Audio Volume
*s Audio Volume: 70
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
The Call status
xStatus Call
xStatus Call [1..n] Status
108
xCommand
Shows the top level overview of the call status. The call identity is used when query for additional
information about the call.
example:
xStatus Call
*s Call 27 Status: Connected
*s Call 27 Direction: Outgoing
*s Call 27 Protocol: "sip"
*s Call 27 CallType: Video
*s Call 27 RemoteNumber: "firstname.lastname@company.com"
*s Call 27 CallbackNumber: "sip:firstname.lastname@company.com"
*s Call 27 DisplayName: "Firstname Lastname"
*s Call 27 TransmitCallRate: 3968
*s Call 27 ReceiveCallRate: 4000
*s Call 27 FacilityServiceId: 0
*s Call 27 Encryption Type: "None"
*s Call 27 PlacedOnHold: False
*s Call 27 Duration: 2354
** end
Shows the status of a call. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<Idle/Dialling/Ringing/Connecting/Connected/Disconnecting/OnHold>
example:
xStatus Call 27 Status
*s Call 27 Status: Connected
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.