Cisco Codec C20 Reference Manual page 92

Cisco TelePresence System Codec C20
Contents Introduction
com"
*r ResultSet Contact 1 ContactMethod 1 Protocol: H323
*r ResultSet Contact 1 ContactMethod 2 ContactMethodId: "2"
*r ResultSet Contact 1 ContactMethod 2 Number: "SIP:/John.Doe.Office@company.
com"
*r ResultSet Contact 1 ContactMethod 2 Protocol: SIP
*r ResultSet Contact 2 Name: "Other"
*r ResultSet Contact 2 ContactId: "e _ 9468400"
*r ResultSet Contact 2 ContactMethod 1 ContactMethodId: "3"
*r ResultSet Contact 2 ContactMethod 1 Number: "H323:John.Doe.Home@company.
com"
*r ResultSet Contact 2 ContactMethod 1 Protocol: H323
*r ResultSet Contact 2 ContactMethod 2 ContactMethodId: "4"
*r ResultSet Contact 2 ContactMethod 2 Number: "SIP:John.Doe.Home@company.
com"
*r ResultSet Contact 2 ContactMethod 2 Protocol: SIP
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
The Presentation commands
xCommand Presentation Start
xCommand Presentation Stop
92
xCommand xCommand
Open a media stream from the selected presentation source.
PresentationSource: Select the video input source to be used for presentation.
SendingMode: Select whether the presentation is shown locally or locally and remotely.
Requires user role: USER
Parameters:
PresentationSource: <1..2>SendingMode: <LocalRemote/LocalOnly<
example:
xCommand Presentation Start PresentationSource:2
OK
*r PresentationStartResult (status=OK):
** end
Stop the media stream from the presentation source.
Requires user role: USER
example:
xCommand Presentation Stop
OK
*r PresentationStopResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.