Cisco Codec C20 Reference Manual page 148

Cisco TelePresence System Codec C20
Contents Introduction
xStatus SIP Profile 1 Authentication
Shows which authentication mechanism is used when registering to the SIP Proxy Server.
Digest: Uses the Digest access authentication method, as specified by RFC 2069.
NTLM: Uses the NTLM authentication method, which is a Microsoft authentication protocol.
Off: No authentication mechanism is used.
Value space of the result returned:
<Digest/NTLM/Off>
example:
xStatus SIP Profile 1 Authentication
*s SIP Profile 1 Authentication: Off
** end
xStatus SIP Profile 1 Registration [1..n] Status
Shows the status of the registration to the SIP Proxy Server.
Deregister: The system is in the process of de-registering to the SIP Proxy.
Failed: The system failed to register to the SIP Proxy.
Inactive: The system is not registered to any SIP Proxy.
Registered: The system is registered to the SIP Proxy.
Registering: The system is in the process of registering to the SIP Proxy.
Value space of the result returned:
<Deregister/Failed/Inactive/Registered/Registering>
example:
xStatus SIP Profile 1 Registration 1 Status
*s SIP Profile 1 Registration 1 Status: Registered
** end
xStatus SIP Profile 1 Registration [1..n] Reason
Shows a message to explain the reason why the SIP registration failed.
Value space of the result returned:
<String>
example:
xStatus SIP Profile 1 Registration 1 Reason
*s SIP Profile 1 Registration 1 Reason: "404 Not Found"
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
xStatus SIP Profile 1 Registration [1..n] URI
148
xCommand
Shows the URI used for registration to the SIP Proxy server.
Value space of the result returned:
<String>
example:
xStatus SIP Profile 1 Registration 1 URI
*s SIP Profile 1 Registration 1 URI: "firstname.lastname@company.com"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.