Cisco Codec C20 Reference Manual page 39

Cisco TelePresence System Codec C20
Contents Introduction
xConfiguration Network [1..1] IPv4 SubnetMask
Define the IPv4 network subnet mask. This setting is only applicable when the Network Assignment is
set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: Only the valid IPv4 address format is accepted.
example: xConfiguration Network 1 IPv4 SubnetMask: "255.255.255.0"
xConfiguration Network [1..1] IPv6 Assignment
Define how the system will obtain its IPv6 address and the default gateway address. This setting only
applies to systems on IPv6 networks.
Requires user role: ADMIN
Value space: <Static/DHCPv6/Autoconf>
Static: The codec and gateway IP-addresses must be configured manually using the Network IPv6
Address and Network IPv6 Gateway settings. The options, for example NTP and DNS server addresses,
must either be set manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions
setting determines which method to use.
DHCPv6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server. See RFC3315
for a detailed description. The Network IPv6 DHCPOptions setting will be ignored.
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See RFC4862 for
a detailed description. The options, for example NTP and DNS server addresses, must either be set
manually or obtained from a DHCPv6 server. The Network IPv6 DHCPOptions setting determines
which method to use.
example: xConfiguration Network 1 IPv6 Assignment: Autoconf
xConfiguration Network [1..1] IPv6 Address
Enter the static IPv6 network address for the system. This setting is only applicable when the Network
IPv6 Assignment is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: Only the valid IPv6 address format is accepted.
example: xConfiguration Network 1 IPv6 Address: "ffff:ffff:ffff:ffff:ffff:ffff:ff
ff:ffff"
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration xConfiguration
xConfiguration Network [1..1] IPv6 Gateway
xConfiguration Network [1..1] IPv6 DHCPOptions
xConfiguration Network [1..1] DNS Domain Name
xConfiguration Network [1..1] DNS Server [1..3] Address
39
xCommand
Define the IPv6 network gateway address. This setting is only applicable when the Network IPv6
Assignment is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: Only the valid IPv6 address format is accepted.
example: xConfiguration Network 1 IPv6 Gateway: "ffff:ffff:ffff:ffff:ffff:ffff:ff
ff:ffff"
Retrieve a set of DHCP options, for example NTP and DNS server addresses, from a DHCPv6 server.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the retrieval of DHCP options from a DHCPv6 server.
On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.
example: xConfiguration Network 1 IPv6 DHCPOptions: On
DNS Domain Name is the default domain name suffix which is added to unqualified names.
Example: If the DNS Domain Name is "company.com" and the name to lookup is "MyVideoSystem",
this will result in the DNS lookup "MyVideoSystem.company.com".
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
example: xConfiguration Network 1 DNS Domain Name: ""
Define the network addresses for DNS servers. Up to 3 addresses may be specified. If the network
addresses are unknown, contact your administrator or Internet Service Provider.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: String with a maximum of 64 characters.
example: xConfiguration Network 1 DNS Server 1 Address: ""
API Reference Guide
xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.