Cisco Codec C20 Reference Manual page 110

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Call [1..n] ReceiveCallRate
Shows the receive bandwidth in the call in kilobits per second (kbps). You can run the command xStatus
Call to find the call identity.
Value space of the result returned:
<Integer>
example:
xStatus Call 27 ReceiveCallRate
*s Call 27 ReceiveCallRate: 4000
** end
xStatus Call [1..n] FacilityServiceId
When calling a facility service, the facility service id is shown. Otherwise the value 0 is returned.
Value space of the result returned:
<0..5>
example:
xStatus Call FacilityServiceId
*s Call 3 FacilityServiceId: 1
** end
xStatus Call [1..n] encryption Type
Shows the encryption type of the call. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<"None"/"Aes-128">
example:
xStatus Call 27 Encryption Type
*s Call 27 Encryption Type: "None"
** end
xStatus Call [1..n] PlacedOnHold
Shows the placed on hold status of the call. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<True/False>
example:
xStatus Call 27 PlacedOnHold
*s Call 27 PlacedOnHold: False
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
xStatus Call [1..n] Duration
xStatus Call [1..n] SecurityStatus
110
xCommand
Shows the duration of a call (in seconds). You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<Integer>
example:
xStatus Call 27 Duration
*s Call 27 Duration: 2354
** end
Security status of a call represents the least of the security statuses of all the endpoints involved in a
CUCM call.
Value space of the result returned:
<Invalid/Unknown/NotAuthenticated/Authenticated>
example:
TBD
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.