Cisco Codec C20 Reference Manual page 153

Cisco TelePresence System Codec C20
Contents Introduction
xStatus SystemUnit Hardware Monitoring Fan [1..n] Status
The feedback shows the speed (rpm) for the specified fan.
Value space of the result returned:
<String>
example:
xstatus SystemUnit Hardware Monitoring Fan 1 Status
*s SystemUnit Hardware Monitoring Fan 1 Status: "locked on 1096 rpm"
** end
xStatus SystemUnit Hardware Temperature
The feedback shows the current maximum temperature (degree Celsius) measured in the codec/system.
Value space of the result returned:
<String>
example:
xstatus SystemUnit Hardware Temperature
*s SystemUnit Hardware Temperature: "64.0"
** end
xStatus SystemUnit Hardware TemperatureThreshold
Returns information on the maximum temperature for the codec. If this temperature is exceeded the
system automatically shuts down.
Value space of the result returned:
<String>
example:
xStatus SystemUnit Hardware TemperatureThreshold
*s SystemUnit Hardware TemperatureThreshold: "85"
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
153
xCommand
xStatus SystemUnit State System
Shows what state the system is in.
InCall: The system is in a call.
Initialized: The system is ready for use.
Initializing: The system is initializing.
Multisite: The system is in a Multisite conference.
Sleeping: The system is in sleep mode.
Value space of the result returned:
<InCall/Initialized/Initializing/Multisite/Sleeping>
example:
xStatus SystemUnit State System
*s SystemUnit State System: Initialized
** end
xStatus SystemUnit State MaxNumberOfCalls
Shows the the maximum number of simultaneous calls.
Value space of the result returned:
<0..5>
example:
xStatus SystemUnit State MaxNumberOfCalls
*s SystemUnit State MaxNumberOfCalls: 3
** end
xStatus SystemUnit State MaxNumberOfActiveCalls
Shows the the maximum number of simultaneous active calls. Calls that are set on hold/transfer are
not counted as active.
Value space of the result returned:
<0..5>
example:
xStatus SystemUnit State MaxNumberOfActiveCalls
*s SystemUnit State MaxNumberOfActiveCalls: 3
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.