Cisco Codec C20 Reference Manual page 109

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Call [1..n] Direction
States the direction of the call initiation. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<Incoming/Outgoing>
example:
xStatus Call 27 Direction
*s Call 27 Direction: Outgoing
** end
xStatus Call [1..n] Protocol
Shows the call protocol of the incoming or outgoing call. You can run the command xStatus Call to find
the call identity.
Value space of the result returned:
<H323/SIP>
example:
xStatus Call 27 Protocol
*s Call 27 Protocol: "h323"
** end
xStatus Call [1..n] CallType
Shows the call type of the incoming or outgoing call. You can run the command xStatus Call to find the
call identity.
Value space of the result returned:
<Video/Audio>
example:
xStatus Call 27 CallType
*s Call 27 CallType: Video
** end
xStatus Call [1..n] RemoteNumber
Shows the remote (far end) number or URI of an incoming or outgoing call. You can run the command
xStatus Call to find the call identity.
Value space of the result returned:
<String>
example:
xStatus Call 27 RemoteNumber
*s Call 27 RemoteNumber: "5585232"
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
xStatus Call [1..n] CallbackNumber
xStatus Call [1..n] DisplayName
xStatus Call [1..n] TransmitCallRate
109
xCommand
Shows the remote (far end) number or URI of an incoming or outgoing call, including the call protocol,
for call back. You can run the command xStatus Call to find the call identity.
Value space of the result returned:
<String>
example:
xStatus Call 27 CallbackNumber
*s Call 27 CallbackNumber: "h323:firstname.lastname@company.com"
** end
Shows the name of the remote (far end) participant in an incoming or outgoing call. You can run the
command xStatus Call to find the call identity.
Value space of the result returned:
<String>
example:
xStatus Call 27 DisplayName
*s Call 27 DisplayName: "firstname.lastname@company.com"
** end
Shows the transmit bandwidth in the call in kilobits per second (kbps). You can run the command xStatus
Call to find the call identity.
Value space of the result returned:
<Integer>
example:
xStatus Call 27 TransmitCallRate
*s Call 27 TransmitCallRate: 768
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.