Cisco Codec C20 Reference Manual page 37

Telepresence system
Hide thumbs Also See for Codec C20:
Table of Contents

Advertisement

Cisco TelePresence System Codec C20
Contents
Introduction
xConfiguration H323 Profile [1..1] Authentication LoginName
The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper
for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper,
i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentica-
tion is required, the system will still try to register. NOTE: Requires the H.323 Gatekeeper Authentication
Mode to be enabled.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
example: xConfiguration H323 Profile 1 Authentication LoginName: ""
xConfiguration H323 Profile [1..1] Authentication Password
The system sends the Authentication Login Name and the Authentication Password to a H.323 Gatekeeper
for authentication. The authentication is a one way authentication from the codec to the H.323 Gatekeeper,
i.e. the system is authenticated to the gatekeeper. If the H.323 Gatekeeper indicates that no authentica-
tion is required, the system will still try to register. NOTE: Requires the H.323 Gatekeeper Authentication
Mode to be enabled.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
example: xConfiguration H323 Profile 1 Authentication Password: ""
xConfiguration H323 Profile [1..1] CallSetup Mode
The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing
H323 calls.
NOTE: Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to Gatekeeper.
Requires user role: ADMIN
Value space: <Direct/Gatekeeper>
Direct: An IP-address must be used when dialing in order to make the H323 call.
Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option
the H323 Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also
be configured.
example: xConfiguration H323 Profile 1 CallSetup Mode: Gatekeeper
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API
xConfiguration
xConfiguration
xConfiguration H323 Profile [1..1] Gatekeeper Discovery
xConfiguration H323 Profile [1..1] Gatekeeper Address
xConfiguration H323 Profile [1..1] H323Alias e164
xConfiguration H323 Profile [1..1] H323Alias ID
37
xCommand
Determine how the system shall register to a H.323 Gatekeeper.
Requires user role: ADMIN
Value space: <Manual/Auto>
Manual: The system will use a specific Gatekeeper identified by the Gatekeeper's IP-address.
Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper responds
to the request sent from the codec within 30 seconds this specific Gatekeeper will be used. This
requires that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper responds, the system
will not use a Gatekeeper for making H.323 calls and hence an IP-address must be specified manually.
example: xConfiguration H323 Profile 1 Gatekeeper Discovery: Manual
Enter the IP address of the Gatekeeper. NOTE: Requires the H.323 Call Setup Mode to be set to Gatekeeper
and the Gatekeeper Discovery to be set to Manual.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: Only the valid IP address format is accepted. An IP address that contains letters (192.a.2.0)
or unvalid IP addresses (192.0.1234.0) will be rejected.
example: xConfiguration H323 Profile 1 Gatekeeper Address: "192.0.2.0"
The H.323 Alias E.164 defines the address of the system, according to the numbering plan implemented
in the H.323 Gatekeeper. The E.164 alias is equivalent to a telephone number, sometimes combined
with access codes.
Requires user role: ADMIN
Value space: <S: 0, 30>
Format: Compact string with a maximum of 30 characters. Valid characters are 0-9, * and #.
example: xConfiguration H323 Profile 1 H323Alias E164: "90550092"
Lets you specify the H.323 Alias ID which is used to address the system on a H.323 Gatekeeper and
will be displayed in the call lists. Example: "firstname.lastname@company.com", "My H.323 Alias ID"
Requires user role: ADMIN
Value space: <S: 0, 49>
Format: String with a maximum of 49 characters.
example: xConfiguration H323 Profile 1 H323Alias ID: "firstname.lastname@company.com"
API Reference Guide
xStatus
Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents