Cisco Codec C20 Reference Manual page 155

Cisco TelePresence System Codec C20
Contents Introduction
xStatus SystemUnit Diagnostics LastRun
Shows when the SystemUnit diagnostics was last run on the codec.
Value space of the result returned:
<String>
example:
xStatus SystemUnit Diagnostics LastRun
*s SystemUnit Diagnostics LastRun: "2012-08-17, 16:23:27"
** end
xStatus SystemUnit Diagnostics Message Type
Returns information on whether an administrator password is set, if there are no cameras detected
and if there are failures in SIP profile registration and H320 Gateway.
Value space of the result returned:
<InvalidAdminPassword/NoCamerasDetected/SIPProfileRegistrationFailure/ H320GatewayFailure>
example:
xstatus SystemUnit Diagnostics Message type
*s SystemUnit Diagnostics Message 1 Type: InvalidAdminPassword
** end
xStatus SystemUnit Diagnostics Message Level
Returns information on the level of the diagnostics message.
Error: There is an error in the system. The system can still be used, but there can be some restrictions.
Warning: A problem is detected and a more specific report follows indicating the exact problem.
Critical: The warning level is critical. The system cannot be used.
Value space of the result returned:
<Error/Warning/Critical>
example:
xStatus SystemUnit Diagnostics Message Level
*r Status (status=Error):
Reason: No match on address expression
XPath: Status/SystemUnit/Diagnostics/Message/Level
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
155
xCommand
The Time status
xStatus Time ZoneOlson
Shows the current time zone on Olson format.
Value space of the result returned:
<String>
example:
xStatus Time ZoneOlson
*s Time ZoneOlson: Europe/Berlin
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.