Cisco Codec C20 Reference Manual page 35

Cisco TelePresence System Codec C20
Contents Introduction
xConfiguration Conference [1..1] Presentation OnPlacedOnHold
Define whether or not to continue sharing a presentation after the remote site has put you on hold.
Requires user role: ADMIN
Value space: <Stop/NoAction>
Stop: The video system stops the presentation sharing when the remote site puts you on hold. The
presentation will not continue when the call is resumed.
NoAction: The video system will not stop the presentation sharing when put on hold. The presentation
will not be shared while you are on hold, but it will continue automatically when the call is resumed.
example: xConfiguration Conference 1 Presentation OnPlacedOnHold: NoAction
xConfiguration Conference [1..1] Multipoint Mode
Define how the video system handles multipoint video conferences. MultiWay requires that your video
network includes an external Multipoint control unit (MCU), which let you set up conferences with many
participants.
Requires user role: ADMIN
Value space: <Auto/Off/MultiWay>
Auto: Use MultiWay for multipoint conferences if the MultiWay service is available. If not, the multipoint
mode is set to Off automatically.
Off: Multipoint conferences are not allowed.
MultiWay: Use MultiWay for multipoint conferences. The Multipoint Mode will be set to Off automati-
cally if the MultiWay service is unavailable, for example when a server address is not specified in the
NetworkServices MultiWay Address setting.
example: xConfiguration Conference 1 Multipoint Mode: Auto
xConfiguration Conference [1..1] IncomingMultisiteCall Mode
Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADMIN
Value space: <Allow/Deny>
Allow: You will be notified when someone calls you while you are already in a call. You can accept
the incoming call or not. The ongoing call may be put on hold while answering the incoming call; or
you may merge the calls (requires MultiSite or MultiWay support).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified about the
incoming call. However, the call will appear as a missed call in the call history list.
example: xConfiguration Conference 1 IncomingMultisiteCall Mode: Allow
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration xConfiguration
FacilityService configuration
xConfiguration FacilityService Service [1..5] Type
xConfiguration FacilityService Service [1..5] Name
35
xCommand
Up to five different facility services can be supported simultaneously. With this setting you can select
what kind of services they are.
A facility service is not available unless both the FacilityService Service Name and the FacilityService
Service Number settings are properly set.
Only FacilityService Service 1 with Type Helpdesk is available on the Touch controller. Facility services
are not available when using the remote control and on-screen menu.
Requires user role: ADMIN
Value space: <Other/Concierge/Helpdesk/Emergency/Security/Catering/Transportation>
Other: Select this option for services not covered by the other options.
Concierge: Select this option for concierge services.
Helpdesk: Select this option for helpdesk services.
Emergency: Select this option for emergency services.
Security: Select this option for security services.
Catering: Select this option for catering services.
Transportation: Select this option for transportation services.
example: xConfiguration FacilityService Service 1 Type: Helpdesk
Set the name of each facility service. Up to five different facility services are supported.
A facility service is not available unless both the FacilityService Service Name and the FacilityService
Service Number settings are properly set.
Only FacilityService Service 1 is available on the Touch controller, and its Name is used on the facility
service call button. Facility services are not available when using the remote control and on-screen menu.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
example: xConfiguration FacilityService Service 1 Name: ""
API Reference Guide
xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.