Cisco Codec C20 Reference Manual page 139

Cisco TelePresence System Codec C20
Contents Introduction
xStatus Network CDP VoIPApplianceVlanID
Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information see
documentation of the IEEE 802.1Q protocol.
Value space of the result returned:
<String>
example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end
Codec C20 API Reference Guide TC6.0 February 2013.
D14869.05
About the API xConfiguration
The NetworkServices status
xStatus NetworkServices NTP Address
139
xCommand
Returns the address of the NTP server(s) the codec is using.
Value space of the result returned:
<String>
example:
xStatus NetworkServices NTP Address
*s NetworkServices NTP Address: "64.104.193.12 64.104.222.16 144.254.15.121"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.