Adding A New User; Deleting A User; Changing A Username - Cisco D9824 Installation And Configuration Manual

Chapter 3 Installation
c In the Passphrase field, type the password, localadmin. Wait a few seconds,
until the Use rhosts to log in is disabled.
Note: The username and password are case-sensitive. The default username
is admin and the default password is localadmin.
d Click OK.
7 Type lr and press Enter.

Adding a New User

1 At the admin prompt, type
2 At the NEW USERNAME prompt, type a new username and press Enter.
3 At the NEW PASSWORD prompt, type a new password and press Enter.
Note: The new password must follow the rules configured in the Password
Complexity parameter. For more information, see To Change the User Login
Passwords (on page 270) for the web GUI or IP (on page 78) for the Front Panel.
4 At the CONFIRM NEW PASSWORD prompt, type the new password again and
press Enter.
Note: The New Password and Confirm New Password should be identical.
5 At the NEW USER PRIVILEGES prompt, enter the type of account you want to
assign the user. The following table illustrates the different login types:
Account Type
Guest
User
Admin
6 At the ADMINISTRATOR PASSWORD prompt, type the administrator's
password and press Enter.

Deleting a User

1 At the admin prompt, type
2 At the USERNAME prompt, type the username you want to remove and press
Enter.
3 At the ADMINISTRATOR PASSWORD prompt, type in the administrator's
password and press Enter.

Changing a Username

1 At the admin prompt, type
2 At the CURRENT USERNAME prompt, type the username you want to edit and
press Enter.
32
pwd add_user
Enter Access
3 View settings only.
2 View and edit settings.
1 View, edit settings, and add/delete user accounts.
pwd del_user
pwd username_change
and press Enter.
and press Enter.
and press Enter.