Factory Default Settings And Lock Levels; Administration - Cisco D9824 Installation And Configuration Manual

Appendix B
Default Settings and Lock Levels

Factory Default Settings and Lock Levels

The D9824 Advanced Multi Decryption Receiver is factory configured with default
settings, unless you have requested a custom factory configuration.
The following table lists the lock levels available for protecting your receiver and its
settings against unauthorized use or modification:
Level
0
1
2
3
4
If a change made to the current Lock Level setting is not saved, the previously save d setting
is restored.

Administration

Parameter
Lock Level
Password
Old Pwd, New Pwd, Confirm
Pwd
Factory Reset
Clear FWD Tables
KB Lock
KB Lock Timeout
LCD Contrast
DL Mode
Type
Bank
Date Format
368
Description
All settings are unlocked (receiver lockout disabled)
All settings are unlocked except Factory Reset,
Password options and receiver parameters.
All settings are unlocked except RF and ASI Input
Tuning parameters.
All settings locked (access via password only), except IP
address and RF power.
All settings locked (can be changed via PNC uplink
signal only)
Default Setting Default Lock Level
0 3
1234 3
N/A 0
N/A 0
N/A 0
Disable 2
60 2
30 2
Always 2
None N/A
App 5514 N/A
YYY_MM_DD 2