Cisco D9824 Installation And Configuration Manual page 121

Menu Item
ON_ID
TS Routing
Top/Bottom Slot
Menu Item
Status
System Name
Application
Manufacture ID
Manufacture Code
Supported CA
System IDs
Serial Number
Hardware Version
Application Version
Company Name
Product Name
Description
Specify the Transport Original
Network ID.
Select EntireTS to use the CAM to
decrypt the entire transport
stream, or select ServicesOnly to
use the CAM to decrypt only the
PIDs being used by the active
services.
Description
Displays the status of the CAM.
Indicates the system name of the CAM.
Displays the factory loaded application
number of the CAM.
Indicates the manufacture's code.
Displays the CA system identification name
of the CAM. Some CAMs may support
multiple CA system IDs.
Indicates the unique serial number of the
CAM.
Displays the hardware version number of
the CAM.
Displays the software version number of the
CAM.
Displays the company name of the CAM.
Displays the product name of the CAM.
Parameters
0 to 65535
EntireTS or ServicesOnly
Parameters
Ready or Not Ready
Setup Menu
99