Cisco D9824 Installation And Configuration Manual page 249

ii In the First ES PID Numbers Offset field, enter the offset of the
subsequent ES PID numbers. For example, if the First ES PID Number is
set to 101 and the ES PID Numbers Offset is set to 100, then the first ES
PID number is 101, and the second ES PID number is 201.
d From the Use Input PMT ES Stream Order choose Yes to assign the ES PID
according to the incoming PMT order. Otherwise, choose No to use the
reserved PIDs defined below.
i In the PCR, VID, AUD, SUBT, VBI, DPI, MPE, TTX, DATA, LSD, CDT,
ETV fields, enter the number of PIDs for the specified streams (PCR, VID,
AUD, SUBT, VBI, DPI, MPE, TTX, DATA, LSD, CDT, ETV) in one
channel.
e Click OK.
4 Click Apply.
Setting the Maximum and Minimum Transport Packets
The maximum and minimum transport packets are set in the Limits section of the
MPEG over IP Output page.
1 In the Maximum Transport Packets/Ethernet Frame field, enter the maximum
number of transport packets per IP packet (1 to 7).
2 In the Minimum number Packets/Second field, enter the minimum number of
transport packets per IP packet. You can enter 0 or 3 to 99999.
Configuring Transport Stream Information
227