Cisco D9824 Installation And Configuration Manual page 71

Menu Item Description
FPS Indicates the frame rate of the input
video stream.
Stream AR Indicates the aspect ratio of the
incoming video stream.
Act Conv Displays the actual applied aspect
ratio conversion.
Audio
Menu Item Description
AUD Indicates the current audio decoder
status.
Format Indicates the format of the audio
input stream.
BR (Kbps) Indicates the bit rate of the audio
input stream, in kbps.
Buffer Indicates the buffer level of the input
audio stream, in bytes.
SFR (kHz) Indicates the sample rate of the input
audio stream, in kHz.
DDP IND Indicates the presence of Dolby
Digital Plus frames within a Dolby
Digital Plus audio stream.
DUAL-MONO IND Indicates the presence of dual mono
audio outputs in the audio stream. If
the dual mono indicator is set to ON,
the left and right outputs will
correspond to mono channel 1 and
mono channel 2 respectively.
Status Menu
Parameters
Typically 25.0, 29.97, 30.0, 50.0,
59.94, 60.0, unknown or
unsupported
4:3 or 16:9
None, 4:3 L/B, 4:3 P/B, 14:9, 14:9,
4:3 F/H or 16:9 F/W
Parameters
AUD1 for audio channel Aud1.
AUD2 for audio channel Aud2.
AUD1 to AUD4 for two stereo
audio channels.
None, Sine, Pink, Beep, MPEG1L1,
MPEG1L2, MPEG2L1, MPEG2L2,
AC3, LOAS AAC, ADTS AAC,
LOAS HEAAC, ADTS HEAAC, or
DDP
–
–
32.0, 44.1, or 48.0 kHz
OFF or ON
OFF or ON
49