Configuring The Ip Input - Cisco D9824 Installation And Configuration Manual

Parameter
ASI Transport
ASI Packet Size (bytes)
Acquisition State
TS ID

Configuring the IP Input

1 From the user interface of the D9824, choose Input > Input Setup. The Input
Setup page is displayed.
Description
Indicates the current transport synchronization status (Error,
Ok, or N/A).
Indicates the packet size (in bytes) for the ASI input (188, 204,
or N/A).
Displays Full if the ASI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables
or None if no ASI or PSI tables have been found.
The Transport ID (in the range from 1 to 65535).
Setting up Input Information
157