Warnings - Cisco D9824 Installation And Configuration Manual

Warnings

Warning Message
Type
ASI TS Set
Overflow
ASI TS Clear
Overflow
MPoIP TS Set
Overflow
MPoIP TS Clear
Overflow
Transport Error Set
Message Cause/Remedy
ASI Output Cause: Uplink settings
may have changed since
Overflow
setting up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and drop
the programs that are
not needed for
downstream devices.
Contact your (uplink)
service provider to
verify the expected bit
rate settings.
ASI Output –
Overflow
Cleared
MPEGoIP Output Cause: Uplink settings
may have changed since
Overflow
setup of the unit.
Variable Bit
Rate/Statmuxed streams
may be in use.
Remedy: Increase output
rate, drop unreferenced
content in DPM Options,
and drop programs not
needed for downstream
devices. Contact the
(uplink) service provider
to verify the expected bit
rate settings.
MPEGoIP Output –
Overflow
Cleared
Continuity Count Cause: Possible uplink
Error or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
Description
The output rate is
higher than level set
by the user.
–
The output rate is
higher than level set
by the user.
–
Transport packet
continuity count
jumped. Possible
packet loss.
ID
40000
40000
41000
41000
42000
325