Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Click Save.
4
Click PE1 to PE32 radio button to edit the program entry.
5
Click Edit. The DPM PE PID MAP dialog box opens.
6
Enter the Output Channel # you want to map to the input channel (Input
Channel #). This value is only used if the PE Action was set to Map. You can
enter a range from 1 to 65535.
7
Enter the Output PMT PID you want to map to the Input PMT PID.
8
In the PE PID MAP area, you can select an existing PID mapping entry you want
to modify or click Add Row to create a new entry.
9
The Input Stream indicates the input service that will be mapped by the current
entry. The Input PID displays the input PID (1 to 8190) that will be mapped by
the current entry. This is only used if the Action is set to Map.
10 From the Action drop-down list, choose the action to perform on the current
PID. The Drop action is always performed, but the Map option is only applied if
the PE Action is Map and the Remapping Mode is Svc ID & PID in the DPM
General Settings section.
Action
Drop
Map
11 In the Stream Type field, enter a stream type to map within a PE to a specified
PID (0 to 255).
214
Description
The service selected by the Category and Instance will be mapped
to the specified PID. This is only applied if the PE action is Map
and the Remapping Mode is Svc ID & PID.
The service selected by the Category and Instance will be removed
from the PMT and the output stream.
- Quick Links:
- D9824 Advanced Multi Decryption Receiver
Hide quick links:
Advertisement
Table of Contents
