Cisco D9824 Installation And Configuration Manual page 361

Warning Message
Type
MPoIP Bitrate Clear
Port #<n>
MPoIP Bitrate Clear
Port #<n>
MoIPI Port<n>: Set
FEC1 Loss (only
available for
D9824 with
LX155 FPGA)
MoIPI Port<n>: Clear
FEC1 Loss (only
available for
D9824 with
LX155 FPGA)
MoIPI Port<n>: Clear
FEC1 Loss (only
available for
D9824 with
LX155 FPGA)
MoIPI Port<n>: Set
FEC2 Loss (only
available for
D9824 with
LX155 FPGA)
Message Cause/Remedy
Inactive port, –
monitoring
stopped
No active –
stream[s],
monitoring
stopped
FEC COL: Cause: The FEC Column
configured stream is configured, but
stream not
not present at the input.
present
Remedy: Verify the Flow
Configuration to ensure
that the ETH Port and
Destination IP and UDP
addresses are correct.
Contact the source
provider to confirm that
the transmission is on
and the configured FEC
streams are present.
FEC COL: stream –
not configured
FEC COL: –
configured
stream present
FEC ROW: Cause: The FEC Row
configured stream is configured, but
stream not
not present at the input.
present
Remedy: Verify the Flow
Configuration to ensure
that the ETH Port and
Destination IP and UDP
addresses are correct.
Contact the source
provider to confirm that
the transmission is on
and the configured FEC
streams are present.
Description
–
–
UDP Stream Loss
condition is detected
for FEC Columns
stream on port
Data<n>.
–
–
The UDP Stream Loss
condition is detected
for FEC Rows stream
on port Data<n>.
ID
92000
92100
92000
92100
93100
93102
93100
93102
93100
93102
93101
93103
339