Cisco D9824 Installation And Configuration Manual page 328

Chapter 6 Service and Maintenance
Alarm Message
Type
SMI Setup Set
SMI Setup Set
SMI Setup Clear
SMI Setup Clear
LMI setup Set
LMI setup Clear
Param Storage Set
306
Message Cause/Remedy
Phase lock error Cause: Hardware
on SMI SDRAM Issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
SMI SDRAM Cause: Hardware
exhaust test failed Issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
SMI SDRAM –
setup successful
SMI SDRAM –
exhaust test
passed
LMI SDRAM Cause: Hardware
exhaust test failed issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
LMI Video –
SDRAM exhaust
test passed
DB NVS flushing Cause: Hardware
ignored issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
Description Severity
SDRAM on Major
SMI bus not
working.
SDRAM on Major
SMI bus not
working.
SDRAM on Major
SMI Bus OK.
SDRAM on Major
SMI Bus OK.
DDR RAM on Major
LMI bus not
working.
DDR RAM on Major
LMI bus OK.
Non-volatile Major
storage system
failed to update
fully.
ID
21000
21000
21000
21000
22000
22000
23000