Cisco D9824 Installation And Configuration Manual page 102

Chapter 4 Front Panel Operation
Passw ord Complex ity
Password Complexity
No Checking
Minimal Checking
Full Complexity Checking
Traps
Menu Item
Trap IP Address
Ins, Del
Trap Community
String
80
Description
There are no restrictions on passwords.
The passwords must comply with the following requirements:

It cannot contain username or reversed username.

It cannot contain any of the following strings: cisco, sciatl, ocsic,
ltaics, atlsci, icslta, or any string achieved by full or partial
capitalization of letters.

No letter is repeated more than three times in a row.

Must contain a minimum of four characters.
The passwords must comply with the following requirements:

It cannot contain username or reversed username.

It cannot contain any of the following strings: cisco, sciatl, ocsic,
ltaics, atlsci, icslta,or any string achieved by full or partial
capitalization of letters.

No letter is repeated more than three times in a row.

Must contain a minimum of eight characters.

Must contain a minimum of three of the following types of
characters: capital letters, small letters, digits, and special
characters.
Description
Sets the destination IP address for SNMP
trap messages for system events (i.e., fault
messages).
You can choose to Insert or Delete entries.
Up to 25 entries can be assigned to the Trap
IP Address and Community String fields.
To add a new entry, press Ins and enter the
new entry in the IP Address or Community
String field. To delete an existing entry,
scroll to the IP address or community string
you want to delete and press Del.
Sets the Community string for the Trap IP
Address.
Parameters
Up to 12 digits in length, e.g.,
155.128.100.200
Public or custom string. Up to
35 characters. The default is:
public.