Cisco D9824 Installation And Configuration Manual page 120

Chapter 4 Front Panel Operation
Menu Item
Idx
PE
Mode
PID
Stream
Type
Inst
Query
Auto Reset
List Mgmt
TS_ON_ID
TS_ID
98
Description
Select the component record to
edit.
Set the Program Entry the
component is located.
Select whether to choose the
component by PID or by stream
type.
If decrypting by PID, set the PID
number.
If decrypting by stream type and
set the stream type.
If decrypting by stream type and
the stream category is USER, set
the stream type value.
If decrypting by stream type, set
the instance of the current stream
type.
Set to Enable to query the CAM
prior to decryption to ensure that
the program can be decrypted.
Set to Enable to automatically reset
the card.
Select whether the Common
Interface List Management should
add or delete individual programs
or update all the programs when
the list changes.
Set to Enable if you want to restrict
the incoming transport stream.
If the incoming stream does not
match the transport stream and
original network ID specified
(TS_ID and ON_ID), the program
will not be decrypted.
Specify the Transport ID.
Parameters
1-64 (up to 32 records for each
CAM)
1 to 32
PID or STREAM
0 to 8192
AUD (audio), VID (video),
SUBT (subtitles), TTX (teletext),
USER
Note: Select USER to manually
enter a stream type in the Type
parameter.
0 to 255
1 to 64
Enabled or Disabled (default)
Enable or Disabled (default)
AddDel or Update All
Note: Updating all the
programs will cause a
temporary loss of service for all
the programs when another is
being modified.
Enable or Disable (default)
0 to 65535