Displaying/Editing Display Machine Data - Siemens SINUMERIK 840D sl Commissioning Manual

Machine and setting data

7.3 Displaying/editing display machine data

7.3 Displaying/editing display machine data
You can access the display machine data via the user interface in the "Start-up" operating
area.
Procedure
72
Press the "Direct selection..." softkey.
The "Axis Direct Selection" window opens.
2. Select the required axis directly from those available in the drop-down
list box.
3. Press the "OK" softkey to save the setting.
- OR -
Press the "Cancel" softkey to reject the settings.
1. Select the "Start-up" operating area.
2. Press the "Mach. data" softkey.
3. Press the menu forward key.
Further softkeys are displayed.
4. Press the "Display MD" softkey.
The display machine data appears.
5. Position the cursor on the entry to be modified and enter the required
value.
6. Press the "Reset (po)" softkey.
A safety prompt appears.
7. Press the "OK" softkey to trigger a warm restart.
- OR -
Press the "Cancel" softkey if you do not want to apply the settings.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)