Siemens SINUMERIK 840D sl Commissioning Manual page 646

Fundamentals
3.5 Notes for personnel changing over to Run MyScreens
3.5 Notes for personnel changing over to Run MyScreens
Note
When using HMI Operate in the NCU, note that all file names are saved in lower case letters
on the CF card (com, png, txt).
Image files
Image files must be saved in the PNG format (xxx.png).
The data must be saved, e.g. for OEM modifications, under
/oem/sinumerik/hmi/ico/[resolution
Adapting the configuration file
Check your configuration files regarding the following points:
● Compare the start softkeys with the currently permissible softkeys (see the list of start
softkeys in the Appendix) and if required, adapt them.
● Rename the integrated image files corresponding to the "Image files" point above.
The data must be saved, e.g. for OEM modifications, under
/oem/sinumerik/hmi/proj
Adapting the help files
All help files must be saved in UTF8. Check your existing files, and resave them accordingly
with a suitable editor.
The HTML files are saved in the following directory, e.g. for German.
/card/user/sinumerik/hmi/hlp/deu
/card/oem/sinumerik/hmi/hlp/deu
/card/addon/sinumerik/hmi/hlp/deu
You must create directories for additional languages corresponding to the language
identifiers (see the Appendix).
Checking the Run MyScreens license
Check whether the number of dialogs that you have entered exceeds the basic scope of a
maximum of 5 dialogs.
To increase the number of dialogs, you require the following software option:
"SINUMERIK Integrate Run MyScreens" (6FC5800-0AP64-0YB0)
28
]
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1