Siemens SINUMERIK 840D sl Commissioning Manual page 67

Settings in the slfsfileattributes.ini file
The slfsfileattributes.ini file is available as a template in the following directory:
../siemens/sinumerik/hmi/template/cfg
The values from 0 ... 7 correspond to the access levels that, for example, also apply to the
password. The 4-digit numbers designate the sequence according to the following rights:
Significance from left to right: R W X S
R
W
X
S
Copy the slfsfileattributes.ini file into one of the following directories:
../oem/sinumerik/hmi/cfg or ../user/sinumerik/hmi/cfg
The operating software must be restarted in order that the changes become effective.
Example
The paths are composed of the data type identifiers. In the following example,
"\wks.dir\*.wpd\*.mpf" comprises the data type for workpiece directories "wks.dir" the
workpieces "*.wpd" and the part programs "*.mpf".
For all workpieces, 7777 is defined as default setting for new part programs.
All entries are in the section [ACCESSMASKS] and have the following form:
[ACCESSMASKS]
\wks.dir\*.wpd\*.mpf = 7777
\mpf.dir\*.mpf = 6577
\cus.dir\*.spf = 6577
See also
Definition of access levels (Page 57)
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
READ Reading files and directories
WRITE Changing, deleting or creating files and directories
EXECUTE Executes program: For files, for directories, always 7
SHOW Outputs a list of files and directories
General settings
6.9 Access levels
61