Configuring cycles
22.10 Turning with ShopTurn
Tapping centered (CYCLE84)
SD55481 $SCS_DRILL_TAPPING_SET_GG12[1]
= 0
= 1
= 2
= 3
SD55482 $SCS_DRILL_TAPPING_SET_GG21[1]
= 0
= 1
= 2
= 3
SD55483 $SCS_DRILL_TAPPING_SET_GG24[1]
= 0
= 1
= 2
22.10.4
Cylinder surface transformation (TRACYL) under ShopTurn
Function
If you wish to use the function cylinder surface transformation (TRACYL) under ShopTurn,
please take the settings from Chapter:
Cylinder surface transformation (TRACYL) (Page 465)
574
Exact stop response as before the cycle call (default value).
G601
G602
G603
Acceleration behavior as before the cycle call (default value).
SOFT
BRISK
DRIVE
Precontrol, the same as before the cycle call (default value).
FFWON
FFWOF
Software option
You require the following software option in order to use this function:
"Transmit and peripheral surface transformation"
Exact stop response
Acceleration behavior
Feedforward control
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)