Searching In The Log Files - Siemens SINUMERIK 840D sl Commissioning Manual

Procedure
18.8.3

Searching in the log files

You can search for specific events in the log.
Precondition
The relevant log file is open.
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1. Select the "Start-up" operating area.
2. Press the "System data" softkey.
The data tree is displayed.
You will find the saved files in the HMI data folder under /logs/action log.
3. Select the desired com file and press the "Open" softkey or double-click
the file.
4. Press the "Display new" softkey to update the display of events in the
log (actual_actionlog.com).
The entries made since the log file was called up are displayed.
1. Press the "Search" softkey.
A new vertical softkey bar appears. The "Search" window opens at the
same time.
2. Enter the desired search term in the "Text" field.
3. Position the cursor in the "Direction" field and choose the search
direction (forward, backward) with the <SELECT> key.
4. Press the "OK" softkey to start the search.
If the text you are searching for is found, the corresponding line is
highlighted.
Press the "Continue search" softkey to continue the search, as
necessary.
- OR -
Press the "Cancel" softkey when you want to cancel the search.
Service and diagnostics
18.8 Action log
343