Siemens SINUMERIK 840D sl Commissioning Manual page 592

SINUMERIK Operate on PC/PCU
24.1 Link OEMFrame application
Value
process
cmdline
oemframe
windowname
classname
deferred
Example
In the following example, the two Windows applications "notepad.exe" and "calc.exe" are
configured as OEMFrame applications.
[processes]
PROC600= process:=notepadOEM,cmdline:="notepad.exe mytext1.txt", oemframe:=true,
deferred:=true, windowname:="mytext1.txt - Notepad", classname:="Notepad"
PROC601= process:=calcOEM, cmdline:="calc.exe" oemframe:=true,
windowname:="calculator"
Section [areas]
The SINUMERIK Operate operating areas are configured in this section.
Value
name
process
Note
Permissible number range
In the "processes" and "areas" sections, the number range 500-999 is reserved for OEM
customers. If you use numbers less than 500, then it is possible that Siemens basis
components will be overwritten!
586
Meaning
Symbolic name of the OEMFrame application. This is required to configure the
operating areas.
Command line which is transferred to the "oemframe.exe" process when starting.
For OEMFrame applications, always set to "true".
Window name of the OEMFrame application - should be determined with
"findwindow.exe" or "spy++.exe".
Class name of the OEMFrame application - should be determined with
"findwindow.exe" or "spy++.exe".
true: OEMFrame application is not started when SINUMERIK Operate powers
up, but only when selected for the first time.
Meaning
Symbolic name for the operating area.
Name of the OEMFrame application according to section [processes].
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)